Wednesday, September 7, 2011

Break time

This is likely my last post for a little while, I'm going to take a week or so off to recuperate. My allergies are acting up so I think a break is in order so I can get them back under control.

Profile view of the near finished hollow form. I still need to do most of the sanding but that will have to wait until after my break.

The bottom with the tenon removed. I had to tape over the large voids and major cracks in order to get even a partial vacuum. With the 6" drum I ended up with about 90 pounds of pressure (28 sq inches @ ~3.2 PSI).

- Posted using BlogPress from my iPhone

No comments:

Post a Comment