Vacation haul

I'm back after a 3 week vacation to Idaho to visit family and to go on a 5 day white water rafting trip.  Along the way I picked up wood whenever possible.  This stack was sourced from Mike Mahoney and includes curly Ash, curly Maple, Maple burl, red Box Elder, and quilted Mormon Poplar.  All of this came from Mike's personal stash.  I also got a tour of Mike's operation - from his shop, to his drying room, on to his shipping room, and a small tour of his home and a quick look at his turning collection.  I don't think I've ever met a nicer person than Mike and he's a fantastic turning to boot.

While in Idaho I visited a couple of turners, Brian Brown in Idaho Falls and Dick Anderson in Pocatello.  I met Dick briefly at the 2011 Desert Woodturning Roundup and I met Brian a couple of years ago when he was in town on business.  With Dick I swapped some Mesquite for some Madrone Burl, Russian Olive, and a piece of Mountain Mahogany.  Brian and I traded some Mesquite, African Sumac, Desert Ironwood, and Olive for Russian Olive, Osage Orange, and Box Elder Burl.

My biggest haul on the vacation though was some Mountain Mahogany I managed to get near the end.  I thought I could get some in the 6" diameter range and hoped to find some between 8-10" diameter.  The biggest piece is approx 12" x 14" on the butt end.  It's also extremely heavy, similar to Desert Ironwood.  When dry it will not float in water, one of only a handful of woods with this property.

Mega catch up

 It's been a busy week, time for another catch up post.

First up is some prep for an upcoming demonstration.  I'm headed to Idaho for vacation in about 3 weeks and will be doing a demonstration at the Woodcraft Guild in Idaho Falls on 7/7/11.

 I'll be doing my multi axis demo, the main feature being my multi axis lidded box with a twist.  As always I prepare the blank ahead of time by turning the inside.  This is primarily to save time but is also because the accuracy needed for the tenon would be hard to do with an audience.

 Next up are a few birdhouses.  The last couple of posts have been their construction.  Here are the finished products.

Some may notice that the 3rd one (Ornamental Yew) is missing.  It had an unfortunate accident while doing the final sanding.  I forgot how thin it was near the bottom and when I tapped on it to seat it on a jam chuck I broke the bottom out of it.  I made this body as a replacement on Friday night and gave the woman that ordered it her choice of the 3.  She picked this one and it's now living happily in her living room.

 This piece was boxed so it can be delivered to the 25th annual American Association of Woodturners symposium in Minneapolis-St. Paul.

 The President's Challenge for June is "Toys".  I'm working on a couple of things, first is a multi axis magic wand.  Next is a Tippy top.  This top is supposed to flip over and spin on the stem.  This one doesn't quite work right but I'm not sure what's wrong.  I'll probably do a couple more to see if I can figure out what went wrong.  I suspect it's too top heavy.

 This afternoon I turned a Kendama.  Kendamas are like the old ball and cup toy but a bit more extreme.  There are at least 4 surfaces to catch the ball one, each of the 3 cups and the point.

xAll pieces were turned out of Red Cedar.  I didn't have any plans and I couldn't find any dimensions on the internet so I had to base my design on a couple of photos.  I'm sure that the dimensions are incorrect. I can now see from additional photos that the cups on the side should be different sizes.  I also had some extra wood so I turned another sphere (above).

Last I had a custom job to turn a spindle and a drop finial for a music stand.  The customer supplied the wood and a poor quality photo to use as the template.  The photo was similar to the photo at left.  I didn't have to copy it exactly but it was used as inspiration for the piece.  The drop final was inspired by the bottom 2" of the spindle only in reverse and slightly different because it needed to taper down to a very small diameter in a relatively short distance.

Birdhouses III

 More work on the birdhouses, this time the roofs.  I chucked up a piece of Russian Olive and turned the outside shape.  The layers are meant to give it the look of layered wooden shingles.

The roof is then flipped over and vacuum chucked so I can turn a recess for the body and remove the majority of the bulk.  I can take it on and off the vacuum chuck to check the thickness and weight and get it centered reasonably well.  Last a hole is drilled in the center for the wire loop that is used to hang them up.

Still some more work to do; sanding, finishing, mounting a perch, burning the lines on the roof, and texturing the roof with a wire brush so the shingles appear more realistic and aged.

Top view with the hole drilled in the center for the hanger.  The 2 on the right are Russian Olive, the 1 on the left is Acacia.